quinta-feira, 4 de março de 2021

SAP S/4HANA Business Partner Field Enhancement

 In most of my Business Partner workshops I was asked the question: How shall we handle our Z-Fields from Vustomer/Vendor Master Data in Business Partner transaction.

Short Answer: You have to rebuild the fields in Business Partner transaction.

In this Cookbook I’ll guide you step by step to implement a Z-Field from table KNA1 into Business Partner transaction.

Introduction

Purpose and target

The purpose of this document is to describe how to implement a BDT enhancement. A field from table KNA1 has to be re-implemented in Business Partner transaction as well to ensure availability in SAP S/4HANA.

Remark: This procedure can be used for all the single fields from Customer or Vendor tables. This Cookbook is not made for fields related to Table Controls as of partner assignment for example from KNVP.

Foundation for this document is SAP note

2309153 – BP_CVI: Guideline Version 1.14 for customer enhancements in CVI (customer/vendor integration) in SAP S/4HANA releases

Target audience: Functional expert, Development expert

Version: SAP S/4HANA On premise 1610 and higher

There is a field in table KNA1 which was available in XDxx transaction.

This field has to be re-implemented in SAP S/4HANA to be available in transaction Business Partner with customer role.

Implementation

Determine Area in Business Partner transaction where to place the new field

In this example the field should be placed in customer role, tab (Screen) ‘Customer: General Data’, Section ’ Additional General Data’

  1. Run transaction BP and navigate to role ‘Customer’->tab ‘Customer: General Data’New field should be placed directly below the field ‘Plant’.To determine screen control settings of BDT, place the cursor into field plant and enter OK-Code BDT_ANALYZER into transaction field
  2. BDT_ANALYZER is starting and gives information about screen control.For later assignment of new view the following information is important:Navigate to
    Section CVIC45- Additional General Data
    and open folder viewsNote down section number (for example CVIC45)
  3. To get View details navigate into view CVIC62 by clicking on name CVIC62Note down
    Application: CVIC
    Differentiation Type: 0
    Data Set: CVIC11

 

Create Technical Objects

 

Create Function Group

  1. Run Object Navigator with transaction SE80

Create PBO Function Module

  1. From context menu of new Function Group choose Create-> Function Module
  2. Enter name, Function Group and Short Text of new Function Module
  3. Enter Coding
    function z_cvic_bupa_pbo_zvic01.
    *"----------------------------------------------------------------------
    *"*"Local Interface:
    *"----------------------------------------------------------------------
      data:
        lt_kna1         type table of kna1,
        table_name_kna1 type fsbp_table_name value 'KNA1'.
    
    * step 1: request data from xo for dynpro structure
      cvi_bdt_adapter=>data_pbo(
        exporting
          i_table_name = table_name_kna1
        importing
          e_data_table = lt_kna1[]
      ).
      if lt_kna1[] is initial.
        clear gs_kna1.
      else.
        read table lt_kna1 into gs_kna1 index 1.
      endif.
    
    endfunction.
    ​

    Save and activate

Create PAI Function Module

  1. From context menu of new Function Group choose Create-> Function Module
  2. Enter name, Function Group and Short Text of new Function Module
  3. Enter Coding
    FUNCTION z_cvic_bupa_pai_zvic01.
    *"----------------------------------------------------------------------
    *"*"Local Interface:
    *"----------------------------------------------------------------------
    DATA: false   TYPE boole-boole  VALUE ' ',
          lt_kna1 TYPE TABLE OF kna1,
          table_name_kna1 TYPE fsbp_table_name VALUE 'KNA1'.
    
    FIELD-SYMBOLS:  <kna1>  LIKE LINE OF lt_kna1.
    
      CHECK cvi_bdt_adapter=>is_direct_input_active( ) = false.
    * step 1: update xo memory from technical screen structure
      cvi_bdt_adapter=>get_current_bp_data(
        EXPORTING
          i_table_name = table_name_kna1
        IMPORTING
          e_data_table = lt_kna1[]
      ).
    
      IF lt_kna1[] IS INITIAL.
        IF gs_kna1 IS NOT INITIAL.
          gs_kna1-kunnr = cvi_bdt_adapter=>get_current_customer( ).
          APPEND gs_kna1 TO lt_kna1.
        ENDIF.
      ELSE.
        READ TABLE lt_kna1 ASSIGNING <kna1> INDEX 1.
        <kna1>-zcust = gs_kna1-zcust.
      ENDIF.
    
      cvi_bdt_adapter=>data_pai(
       i_table_name = table_name_kna1
       i_data_new   = lt_kna1[]
       i_validate   = false
      ).
    
    * step 2: check fields
      CHECK cvi_bdt_adapter=>get_activity( ) <> cvi_bdt_adapter=>activity_display.
    
    *   SPACE to implement own PAI checks
    
    ENDFUNCTION.
    

    Save and activate.

Create Technical Screen

  1. From context menu of new Function Group choose Create-> Function Module
  2. Enter screen number
  3. Enter screen attributes
    Short Text and type Subscreen
  4. Navigate to Layout (Screen Painter)
  5. Create Text Field ‘End-Customers’
  6. Accept dictionary reference proposal
  7. Create Input field at position 25
  8. Define Field as NUMC via double click at field
  9. Activate the new object and close Screen PainterNavigate to screen Flow Logic
  10. Assign PBO Module
  11. Create PBO Module with double click at pbo
    Enter sub routine pbo
  12. Create sub routine pbo with double click at pbo
    Enter coding

    *&---------------------------------------------------------------------*
    *& Form PBO
    *&---------------------------------------------------------------------*
    *& text
    *&---------------------------------------------------------------------*
    *& -->  p1        text
    *& <--  p2        text
    *&---------------------------------------------------------------------*
    FORM pbo .
      call FUNCTION 'BUS_PBO'.
    ENDFORM.
    

     

  13. Assign PAI Module
  14. Create PAI Module with double click at paiEnter sub routine pai
  15. Create sub routine pai with double click at paiEnter coding
    *&---------------------------------------------------------------------*
    *& Form PAI
    *&---------------------------------------------------------------------*
    *& text
    *&---------------------------------------------------------------------*
    *& -->  p1        text
    *& <--  p2        text
    *&---------------------------------------------------------------------*
    FORM pai .
      call FUNCTION 'BUS_PAI'.
    ENDFORM.​

 

Extend Complex Interface CVIS_EI_EXTERN

To ensure data transportation from Business Partner to Customer master data the complex interface of CVI has to extended by the additional field.

  1. Open ABAP Dictionary run transaction SE11 and enter data type CVIS_EI_EXTERN
  2. Use forward navigation to reach customer’s central data using double click

  3. Both structures DATA and DATAX needs to get an append
  4. Create append to DATA structure typeNavigate into structure with double click
  5. Create Append structure ZKNA1_ENH
  6. Add structure component and component type as definition in KNA1
  7. Save and Activate changes
  8. Navigate back to Structure CMDS_EI_CMD_CENTRAL
  9. Create append to DATAX structure typeNavigate into structure CMDS_EI_VMD_CENTRAL_DATA_XFLAG with double click
  10. Create an Append Structure ZKNA1_ENHX
  11. Add structure component ZCUST component type BAPIUPDATE
  12. Save and activate changes
  13. Leave transaction SE11

Customizing settings in BDT

Create Field Group

  1. Open BDT menu using BUPT in OK-Code field
  2. Navigate to Screen Layout section and open Field Groups
  3. Create a new Field Group in Customer Name space
  4. Create Field Group 600
    Function Module CVIC_BUPA_EVENT_FMOD2_ENH is used to determine field control (mandatory, hidden, …) from customizing
  5. Assign fields from technical screen to field groupSave your changes

Create View

  1. Navigate to Screen Layout section and open Views
  2. Create a new ViewTake Values from Chapter ‘Determine Area in BP transaction where to place the new field’Use technical screen program name and number from chapter ‘Create Technical Screen’Use PBO and PAI function module names from chapters ‘Create PAI Function Module’ and ‘Create PBO Function Module’
  3. Assign Field Group to View
  4. Save your changes

 

Assign View to Section

  1. Navigate to Screen Layout section and open Sections
  2. Position Cursor on Section determined in Chapter ‘Determine Area in BP transaction where to place the new field’
  3. Mark Section and choose Section->View Assignment from navigation tree
  4. Choose New Entries
  5. Enter data for new assignmentUse View number from Chapter ‘Create View’ Save the data

 

Test

  1. Start Transaction BP
  2. Search for a customer
  3. Display the customer
  4. Select role ‘Customer’
  5. Navigate to tab ‘Customer: General Data’

Conclusion

With this guidance you are able to implement additional fields at Business Partner transaction on your own.


Source: https://blogs.sap.com/2019/11/07/sap-s-4hana-business-partner-field-enhancement/

Nenhum comentário:

Postar um comentário